VANE PUMP (for 5L-E) DISASSEMBLY


  1. REMOVE POWER STEERING SUCTION PORT UNION


    1. A01BH19

      Remove the bolt and the power steering suction port union.

    2. Using a screwdriver, remove the O-ring from the power steering suction port union.

  2. REMOVE FLOW CONTROL VALVE


    1. A01BDLZ

      Remove the pressure port union.

    2. Remove the O-ring from the pressure port union.

    3. Remove the flow control valve and the compression spring.

  3. REMOVE REAR VANE PUMP HOUSING


    1. A01BEQP

      Remove the 4 bolts and the rear vane pump housing.

    2. Remove the gasket.

    3. Remove the 2 O-rings from the rear vane pump housing.

  4. REMOVE REAR VANE PUMP SIDE PLATE


    1. Remove the wave washer from the rear vane pump side plate.

    2. A01BCE4

      Remove the rear vane pump side plate.

  5. REMOVE VANE PUMP CAM RING


    1. A01BCNI

      Remove the vane pump cam ring.

  6. REMOVE VANE PUMP ROTOR


    1. Remove the 10 vane pump plates.

    2. A01BDOB

      Using 2 screwdrivers, remove the vane pump shaft snap ring from the vane pump shaft.

    3. Remove the vane pump rotor.

  7. REMOVE VANE PUMP SHAFT

  8. REMOVE VANE PUMP HOUSING OIL SEAL


    1. A01BAUOE01

      Using a screwdriver, remove the vane pump housing oil seal.

      Note

      Be careful not to damage the front vane pump housing.