PARKING BRAKE CABLE REMOVAL


  1. REMOVE REAR WHEEL

  2. REMOVE REAR BRAKE DRUM


    1. A01BF75E01

      Release the parking brake lever, and remove the brake drum.

      Tech Tips

      If the brake drum cannot be removed easily, perform the following steps.

    2. Remove the hole plug and insert a screwdriver through the hole in the backing plate, and hold the automatic adjusting lever away from the adjuster.

    3. Using another screwdriver, contract the brake shoe adjuster by turning the adjusting wheel.

  3. REMOVE REAR AXLE BRAKE DRUM GASKET

  4. REMOVE AUTOMATIC ADJUST LEVER


    1. A01BDIP

      Remove the automatic adjust lever and the tension spring.

  5. SEPARATE PARKING BRAKE SHOE STRUT SET


    1. A01BHY6E01

      Using SST, remove the upper side tension spring from the brake shoe.

      SST
      09703-30011

  6. REMOVE FRONT BRAKE SHOE


    1. A01BGIR

      Using a needle-nose pliers, remove the anchor side tension spring.

    2. A01BANUE01

      Using SST, remove the cup, shoe hold-down sprig and pin.

      SST
      09718-00010
    3. A01BDX5E01

      Remove the parking brake shoe lower strut.

    4. Separate the brake shoe return spring, and remove the front brake shoe.

  7. REMOVE REAR BRAKE SHOE


    1. A01BHHPE01

      Using SST, remove the cup, shoe hold-down sprig and pin.

      SST
      09718-00010
    2. A01BBA3

      Disconnect the parking brake cable No.3 and remove the rear brake shoe.

  8. REMOVE PARKING BRAKE CABLE ASSEMBLY NO.3 (NARROW BODY)


    1. A01BAUJ

      Remove the 2 bolts and separate the parking brake cable assembly No.3 from the backing plate.

    2. Remove the 5 bolts, nut and parking brake cable assembly No.3.

      A01BGT2

    3. Remove the parking brake cable assembly No.3 from the parking brake equalizer.

  9. REMOVE PARKING BRAKE CABLE ASSEMBLY NO.3 (WIDE BODY)


    1. A01BAUJ

      Remove the 2 bolts and separate the parking brake cable assembly No.3 from the backing plate.

    2. Remove the 6 bolts, nut and parking brake cable assembly No.3.

      A01BHB0

    3. Remove the parking brake cable assembly No.3 from the parking brake equalizer.