REAR SPEED SENSOR INSTALLATION


  1. INSTALL REAR SPEED SENSOR LH


    1. Install the rear speed sensor LH with the bolt.

      A01BAL2
      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      Prevent foreign matter from attaching to the sensor tip.

    2. Attach the 4 clamps.

    3. Connect the connector.

  2. INSTALL REAR SPEED SENSOR RH


    1. Install the speed sensor RH with bolt.

      A01BBDO
      Torque:
      8.5 N*m  { 87 kgf*cm, 75 ft.*lbf }

      Note

      Prevent foreign matter from attaching to the sensor tip.

    2. Install the 2 harness clamps with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Attach the 3 clamps.

    4. Connect the connector.

  3. INSTALL REAR WHEEL

    Torque:
    100 N*m  { 1020 kgf*cm, 74 ft.*lbf }

  4. CHECK SPEED SENSOR SIGNAL

    Click here