WHEEL ALIGNMENT ADJUSTMENT


  1. INSPECT TIRES

  2. MEASURE VEHICLE HEIGHT


    1. A01BI2OE01

      Bounce the vehicle up and down at the corners to stabilize the suspension and inspect the vehicle height.

      Measuring points
      A
      Ground clearance of front No. 1 suspension adjust cam bolt head.
      B
      Ground clearance of front center position of rear leaf spring front installation bolt head.

      Note


      • Before inspecting the wheel alignment, adjust the vehicle height to the specified value.

      • The standard value shown here is a value that is used for adjusting the wheel alignment and does not indicate the height of an actual vehicle.

      Vehicle height
      Australia
      Model A mm (in.) B mm (in.)
      TRH201R-RBMDKQ 265 (10.43) 273 (10.75)
      TRH201R-RBPDKQ 265 (10.43) 273 (10.75)
      TRH221R-MBMDKQ 272 (10.71) 274 (10.79)
      TRH221R-MBPDKQ 272 (10.71) 273 (10.75)
      TRH223R-LEMDKQ 256 (10.08) 264 (10.39)
      TRH223R-LEPDKQ 256 (10.08) 264 (10.39)
      KDH201R-RBMDYQ 261 (10.28) 270 (10.63)
      KDH201R-RBPDYQ 260 (10.24) 269 (10.59)
      KDH221R-MBMDYQ 268 (10.55) 272 (10.71)
      KDH221R-MBPDYQ 268 (10.55) 271 (10.67)
      KDH223R-LEMDYQ 253 (9.96) 262 (10.31)
      KDH223R-LEPDYQ 253 (9.96) 262 (10.31)
      South Africa
      Model A mm (in.) B mm (in.)
      TRH201R-RBMDKN 265 (10.43) 273 (10.75)
      TRH221R-MBMDKN 272 (10.71) 274 (10.79)
      TRH223R-LEMDKN 259 (10.20) 266 (10.47)
      TRH213R-JDMNKN 255 (10.04) 262 (10.31)
      TRH223R-LEMNKN 255 (10.04) 262 (10.31)
      KDH200R-RBMDYN 262 (10.31) 270 (10.63)
      KDH220R-MBMDYN 268 (10.55) 272 (10.71)
      KDH222R-LEMDYN 255 (10.04) 264 (10.39)
      KDH212R-JDMNYN 254 (10.00) 262 (10.31)
      KDH222R-LEMNYN 253 (9.96) 261 (10.28)
      New Zealand
      Model A mm (in.) B mm (in.)
      TRH223R-LEMDKQ 254 (10.00) 264 (10.39)
      KDH223R-LEMDYQ 251 (9.88) 263 (10.35)
      TRH223R-LEPDKQ 254 (10.00) 264 (10.39)
      TRH201R-SRMDK 262 (10.31) 270 (10.63)
      TRH201R-SRPDK 262 (10.31) 270 (10.63)
      KDH201R-SRMDY 257 (10.12) 268 (10.55)
      KDH201R-SRPDY 257 (10.12) 268 (10.55)
      KDH221R-MFMDY 267 (10.51) 270 (10.63)
      KDH221R-MFPDY 267 (10.51) 269 (10.59)
      Thailand
      Model A mm (in.) B mm (in.)
      KDH200R-RBMDYT 262 (10.31) 271 (10.67)
      TRH213R-KDPNKT 245 (9.65) 264 (10.39)
      KDH202R-RDMNYT 255 (10.04) 269 (10.59)
      KDH222R-LEMDYT 266 (10.47) 269 (10.59)
      TRH223R-LEMDKT 268 (10.55) 270 (10.63)
      Singapore
      Model A mm (in.) B mm (in.)
      KDH221R-MBMDYQ 268 (10.55) 272 (10.71)
      KDH221R-MBPDYQ 268 (10.55) 271 (10.67)
      KDH223R-LEPDYQ 253 (9.96) 262 (10.31)
      KDH201R-RBPDY 261 (10.28) 270 (10.63)
      KDH201R-SBMDY 261 (10.28) 269 (10.59)
      KDH203R-REMDY 256 (10.08) 268 (10.55)
      China
      Model A mm (in.) B mm (in.)
      TRH213L-JDMNK 255 (10.04) 264 (10.39)
      TRH223L-LEMNK 256 (10.08) 264 (10.39)
      TRH223L-LEPNK 256 (10.08) 264 (10.39)
      The Philippines
      Model A mm (in.) B mm (in.)
      KDH202L-REMDY 262 (10.31) 270 (10.63)
      KDH212L-JDMNY 259 (10.20) 264 (10.39)
      KDH212L-KDPNY 244 (9.61) 270 (10.63)
      G.C.C. Countries (*1)
      Model A mm (in.) B mm (in.)
      TRH201L-SBMDKV 265 (10.43) 271 (10.67)
      TRH201L-SRMDKV 262 (10.31) 271 (10.67)
      TRH221L-MBMDKV 272 (10.71) 273 (10.75)
      TRH203L-REMDKV 264 (10.39) 271 (10.67)
      TRH213L-JEMDKV 264 (10.39) 266 (10.47)
      TRH223L-LEMDKV 266 (10.47) 272 (10.71)
      TRH223L-LEMNKV 265 (10.43) 268 (10.55)
      KDH200L-SBMDYV 261 (10.28) 269 (10.59)
      KDH202L-REMDYV 261 (10.28) 270 (10.63)
      KDH212L-JEMDYV 263 (10.35) 265 (10.43)
      KDH222L-LEMDYV 266 (10.47) 272 (10.71)
      KDH222L-LEMNYV 265 (10.43) 268 (10.55)
      (*1)
      Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar and Kuwait
      Russia
      Model A mm (in.) B mm (in.)
      TRH223L-LEMNKX 256 (10.08) 265 (10.43)
      Hong Kong
      Model A mm (in.) B mm (in.)
      TRH201R-SSMDK 262 (10.31) 271 (10.67)
      KDH201R-SSMDY 257 (10.12) 269 (10.59)
      KDH201R-SSPDY 257 (10.12) 269 (10.59)
      KDH201R-SSPNY 255 (10.04) 268 (10.55)
      Mexico
      Model A mm (in.) B mm (in.)
      TRH201L-SBMDK 265 (10.43) 272 (10.71)
      TRH201L-EFMDK 265 (10.43) 272 (10.71)
      TRH221L-MBMDK 272 (10.71) 274 (10.79)
      TRH221L-LFMDK 273 (10.75) 274 (10.79)
      TRH213L-JDMNK 266 (10.47) 266 (10.47)
      TRH223L-LEMNK 262 (10.31) 268 (10.55)
      Central and South America
      Model A mm (in.) B mm (in.)
      TRH201L-SBMDK 265 (10.43) 273 (10.75)
      TRH221L-MBMDK 272 (10.71) 272 (10.71)
      TRH221L-LFMDK 273 (10.75) 274 (10.79)
      KDH200L-RBMDY 262 (10.31) 271 (10.67)
      KDH200L-SBMDY 261 (10.28) 269 (10.59)
      KDH201L-SBMDY 261 (10.28) 268 (10.55)
      KDH203L-RDMDY 261 (10.28) 270 (10.63)
      LH200L-RBMDE 262 (10.31) 272 (10.71)
      TRH203L-REMDK 264 (10.39) 270 (10.63)
      TRH213L-JEMDK 264 (10.39) 266 (10.47)
      TRH223L-LEMDK 265 (10.43) 272 (10.71)
      TRH223L-LEMNK 265 (10.43) 268 (10.55)
      LH202L-REMDE 262 (10.31) 271 (10.67)
      LH202L-RDMDE 262 (10.31) 272 (10.71)
      LH212L-JEMDE 264 (10.39) 267 (10.51)
      LH222L-LEMDE 266 (10.47) 273 (10.75)
      Malaysia
      Model A mm (in.) B mm (in.)
      KDH200R-RBMDYE 262 (10.31) 271 (10.67)
      TRH203R-EDMDKE 264 (10.39) 271 (10.67)
      KDH202R-EDMDYE 262 (10.31) 270 (10.63)
      Algeria
      Model A mm (in.) B mm (in.)
      KDH222L-LEMNYV 265 (10.43) 268 (10.55)
      KDH200L-RBMDY 262 (10.31) 271 (10.67)
      KDH220L-MBMDY 269 (10.59) 272 (10.71)
      KDH202L-REMDY 262 (10.31) 270 (10.63)
      KDH212L-JEMDY 263 (10.35) 265 (10.43)
      KDH222L-LEMDY 265 (10.43) 271 (10.67)
      Vietnam
      Model A mm (in.) B mm (in.)
      TRH213L-JEMDKU 264 (10.39) 266 (10.47)
      TRH213L-JDMNKU 256 (10.08) 263 (10.35)
      KDH212L-JEMDYU 263 (10.35) 265 (10.43)
      Others
      Model A mm (in.) B mm (in.)
      TRH201L-SBMDK 265 (10.43) 273 (10.75)
      TRH221L-MBMDK 272 (10.71) 272 (10.71)
      KDH200R-RBMDY 262 (10.31) 271 (10.67)
      KDH200R-SBMDY 261 (10.28) 269 (10.59)
      KDH200L-RBMDY 262 (10.31) 271 (10.67)
      KDH200L-SBMDY 261 (10.28) 269 (10.59)
      KDH220L-MBMDY 269 (10.59) 272 (10.71)
      LH200R-RBMDE 262 (10.31) 272 (10.71)
      LH200R-SBMDE 262 (10.31) 270 (10.63)
      LH200L-RBMDE 262 (10.31) 272 (10.71)
      TRH203R-REMDK 264 (10.39) 270 (10.63)
      TRH203L-REMDK 263 (10.35) 270 (10.63)
      TRH213R-JEMDK 264 (10.39) 266 (10.47)
      TRH213L-JEMDK 264 (10.39) 266 (10.47)
      TRH223R-LEMDK 266 (10.47) 272 (10.71)
      TRH223L-LEMDK 265 (10.43) 272 (10.71)
      TRH223L-LEMNK 265 (10.43) 268 (10.55)
      KDH202R-REMDY 263 (10.35) 270 (10.63)
      KDH202L-REMDY 263 (10.35) 270 (10.63)
      KDH202L-RDMDY 262 (10.31) 271 (10.67)
      KDH212R-JEMDY 263 (10.35) 265 (10.43)
      KDH212L-JEMDY 263 (10.35) 265 (10.43)
      KDH222R-LEMDY 266 (10.47) 269 (10.59)
      KDH222L-LEMDY 265 (10.43) 271 (10.67)
      LH202R-REMDE 262 (10.31) 271 (10.67)
      LH202L-REMDE 262 (10.31) 271 (10.67)
      LH202L-RDMDE 262 (10.31) 272 (10.71)
      LH212R-JEMDE 264 (10.39) 267 (10.51)
      LH212L-JEMDE 264 (10.39) 267 (10.51)
      LH222R-LEMDE 266 (10.47) 273 (10.75)
      LH222L-LEMDE 266 (10.47) 273 (10.75)

  3. INSPECT TOE-IN


    1. A01BD1HE07

      Bounce the vehicle up and down at the corners to stabilize the suspension and inspect the vehicle height.

    2. Inspect the toe-in.

      Toe-in
      A-B

      Toe-in

      (total)

      		 2.0 +/-2.0 mm (0.08 +/-0.08 in.)

      Tech Tips

      If the toe-in is not within the specified range, adjust it at the rack ends.

  4. ADJUST TOE-IN


    1. Measure the thread lengths of the right and left rack ends.

      Standard
      Difference in thread length of 3.0 mm (0.12 in.) or less

    2. Remove the rack boot set clips.

    3. Loosen the tie rod end lock nuts.

    4. Adjust the rack ends if the difference in thread length between the right and left rack ends is not within the specified range.


      1. Extend the longer rack end if the measured toe-in deviates toward the outer-side.

      2. Shorten the shorter rack end if the measured toe-in deviates toward the inner-side.

    5. Turn the right and left rack ends by an equal amount to adjust the toe-in.

      Tech Tips

      Try to adjust the toe-in to the center of the specified range.

    6. A01BFPKE02

      Make sure that the lengths of the right and left rack ends are the same.

      Standard
      2.0 +/-1.0 mm (0.08 +/-0.04 in.)

    7. Tighten the tie rod end lock nuts.

      Torque:
      74 N*m  { 755 kgf*cm, 55 ft.*lbf }

      Note

      Temporarily tighten the lock nut while holding the hexagonal part of the steering rack end so that the lock nut and the steering rack end do not turn together.

      Hold the width across flat of the tie rod end and tighten the lock nut.

    8. Place the boots on the seats and install the clips.

      Tech Tips

      Make sure that the boots are not twisted.

  5. INSPECT WHEEL ANGLE


    1. A01BETKE13

      Turn the steering wheel fully left and right and measure the turning angle.

      Note


      • Perform the inspection while the vehicle is empty.

      • The maximum tolerance of right and left difference for the camber and caster is 30' (0.5°) or less.

      Wheel turning angle
      Inside Wheel

      38°00' +1°30', -2°30'

      (38.00° +1.5°, -2.5°)

      Outside Wheel:

      Reference

      33°00' +1°30', -2°30'

      (33.00° +1.5°, -2.5°)

      If the right and left inside wheel angles differ from the specified range, check the right and left rack end lengths.

  6. INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION


    1. A01BETTE19

      Put the front wheel on the center of the alignment tester.

    2. Remove the center ornament.

    3. Install the camber-caster-steering axis inclination gauge at the center of the axle hub or drive shaft.

    4. Inspect the camber, caster and steering axis inclination.

      Note


      • Perform the inspection while the vehicle is empty.

      • The maximum tolerance of right and left difference for the camber and caster is 30' (0.5°) or less.

      Camber inclination

      Except

      TRH213R-KDPNKT

      KDH212L-KDPNY

      -0°20' +/-45'

      (-0.33° +/-0.75°)

      TRH213R-KDPNKT

      KDH212L-KDPNY

      -0°25' +/-45'

      (-0.42° +/-0.75°)
      Caster inclination
      Australia
      Model Caster
      TRH201R-RBMDKQ

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH201R-RBPDKQ

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH221R-MBMDKQ

      2°20' +/-45'

      (2.33° +/-0.75°)
      TRH221R-MBPDKQ

      2°20' +/-45'

      (2.33° +/-0.75°)
      TRH223R-LEMDKQ

      2°35' +/-45'

      (2.58° +/-0.75°)
      TRH223R-LEPDKQ

      2°35' +/-45'

      (2.58° +/-0.75°)
      KDH201R-RBMDYQ

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH201R-RBPDYQ

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH221R-MBMDYQ

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH221R-MBPDYQ

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH223R-LEMDYQ

      2°35' +/-45'

      (2.58° +/-0.75°)
      KDH223R-LEPDYQ

      2°35' +/-45'

      (2.58° +/-0.75°)
      South Africa
      Model Caster
      TRH201R-RBMDKN

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH221R-MBMDKN

      2°20' +/-45'

      (2.33° +/-0.75°)
      TRH223R-LEMDKN

      2°30' +/-45'

      (2.50° +/-0.75°)
      TRH213R-JDMNKN

      2°35' +/-45'

      (2.58° +/-0.75°)
      TRH223R-LEMNKN

      2°35' +/-45'

      (2.58° +/-0.75°)
      KDH200R-RBMDYN

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH220R-MBMDYN

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH222R-LEMDYN

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH212R-JDMNYN

      2°35' +/-45'

      (2.58° +/-0.75°)
      KDH222R-LEMNYN

      2°35' +/-45'

      (2.58° +/-0.75°)
      New Zealand
      Model Caster
      TRH223R-LEMDKQ

      2°35' +/-45'

      (2.58° +/-0.75°)
      KDH223R-LEMDYQ

      2°35' +/-45'

      (2.58° +/-0.75°)
      TRH223R-LEPDKQ

      2°35' +/-45'

      (2.58° +/-0.75°)
      TRH201R-SRMDK

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH201R-SRPDK

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH201R-SRMDY

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH201R-SRPDY

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH221R-MFMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH221R-MFPDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      Thailand
      Model Caster
      KDH200R-RBMDYT

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH213R-KDPNKT

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH202R-RDMNYT

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH222R-LEMDYT

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH223R-LEMDKT

      2°25' +/-45'

      (2.42° +/-0.75°)
      Singapore
      Model Caster
      KDH221R-MBMDYQ

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH221R-MBPDYQ

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH223R-LEPDYQ

      2°35' +/-45'

      (2.58° +/-0.75°)
      KDH201R-RBPDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH201R-SBMDY

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH203R-REMDY

      2°30' +/-45'

      (2.50° +/-0.75°)
      China
      Model Caster
      TRH213L-JDMNK

      2°35' +/-45'

      (2.58° +/-0.75°)
      TRH223L-LEMNK

      2°30' +/-45'

      (2.50° +/-0.75°)
      TRH223L-LEPNK

      2°30' +/-45'

      (2.50° +/-0.75°)
      The Philippines
      Model Caster
      KDH202L-REMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH212L-JDMNY

      2°35' +/-45'

      (2.58° +/-0.75°)
      KDH212L-KDPNY

      2°25' +/-45'

      (2.42° +/-0.75°)
      G.C.C. Countries (*1)
      Model Caster
      TRH201L-SBMDKV

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH201L-SRMDKV

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH221L-MBMDKV

      2°20' +/-45'

      (2.33° +/-0.75°)
      TRH203L-REMDKV

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH213L-JEMDKV

      2°30' +/-45'

      (2.50° +/-0.75°)
      TRH223L-LEMDKV

      2°20' +/-45'

      (2.33° +/-0.75°)
      TRH223L-LEMNKV

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH200L-SBMDYV

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH202L-REMDYV

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH212L-JEMDYV

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH222L-LEMDYV

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH222L-LEMNYV

      2°30' +/-45'

      (2.50° +/-0.75°)
      (*1)
      Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar and Kuwait
      Russia
      Model Caster
      TRH223L-LEMNKX

      2°35' +/-45'

      (2.58° +/-0.75°)
      Hong Kong
      Model Caster
      TRH201R-SSMDK

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH201R-SSMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH201R-SSPDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH201R-SSPNY

      2°30' +/-45'

      (2.50° +/-0.75°)
      Mexico
      Model Caster
      TRH201L-SBMDK

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH201L-EFMDK

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH221L-MBMDK

      2°20' +/-45'

      (2.33° +/-0.75°)
      TRH221L-LFMDK

      2°20' +/-45'

      (2.33° +/-0.75°)
      TRH213L-JDMNK

      2°30' +/-45'

      (2.50° +/-0.75°)
      TRH223L-LEMNK

      2°25' +/-45'

      (2.42° +/-0.75°)
      Central and South America
      Model Caster
      TRH201L-SBMDK

      2°20' +/-45'

      (2.33° +/-0.75°)
      TRH221L-MBMDK

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH221L-LFMDK

      2°20' +/-45'

      (2.33° +/-0.75°)
      KDH200L-RBMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH200L-SBMDY

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH201L-SBMDY

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH203L-RDMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      LH200L-RBMDE

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH203L-REMDK

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH213L-JEMDK

      2°30' +/-45'

      (2.50° +/-0.75°)
      TRH223L-LEMDK

      2°20' +/-45'

      (2.33° +/-0.75°)
      TRH223L-LEMNK

      2°20' +/-45'

      (2.33° +/-0.75°)
      LH202L-REMDE

      2°20' +/-45'

      (2.33° +/-0.75°)
      LH202L-RDMDE

      2°20' +/-45'

      (2.33° +/-0.75°)
      LH212L-JEMDE

      2°30' +/-45'

      (2.50° +/-0.75°)
      LH222L-LEMDE

      2°20' +/-45'

      (2.33° +/-0.75°)
      Malaysia
      Model Caster
      KDH200R-RBMDYE

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH203R-EDMDKE

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH202R-EDMDYE

      2°25' +/-45'

      (2.42° +/-0.75°)
      Algeria
      Model Caster
      KDH222L-LEMNYV

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH200L-RBMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH220L-MBMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH202L-REMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH212L-JEMDY

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH222L-LEMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      Vietnam
      Model Caster
      TRH213L-JEMDKU

      2°30' +/-45'

      (2.50° +/-0.75°)
      TRH213L-JDMNKU

      2°35' +/-45'

      (2.58° +/-0.75°)
      KDH212L-JEMDYU

      2°30' +/-45'

      (2.50° +/-0.75°)
      Others
      Model Caster
      TRH201L-SBMDK

      2°20' +/-45'

      (2.33° +/-0.75°)
      TRH221L-MBMDK

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH200R-RBMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH200R-SBMDY

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH200L-RBMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH200L-SBMDY

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH220L-MBMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      LH200R-RBMDE

      2°25' +/-45'

      (2.42° +/-0.75°)
      LH200R-SBMDE

      2°25' +/-45'

      (2.42° +/-0.75°)
      LH200L-RBMDE

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH203R-REMDK

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH203L-REMDK

      2°25' +/-45'

      (2.42° +/-0.75°)
      TRH213R-JEMDK

      2°30' +/-45'

      (2.50° +/-0.75°)
      TRH213L-JEMDK

      2°30' +/-45'

      (2.50° +/-0.75°)
      TRH223R-LEMDK

      2°20' +/-45'

      (2.33° +/-0.75°)
      TRH223L-LEMDK

      2°20' +/-45'

      (2.33° +/-0.75°)
      TRH223L-LEMNK

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH202R-REMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH202L-REMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH202L-RDMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH212R-JEMDY

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH212L-JEMDY

      2°30' +/-45'

      (2.50° +/-0.75°)
      KDH222R-LEMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      KDH222L-LEMDY

      2°25' +/-45'

      (2.42° +/-0.75°)
      LH202R-REMDE

      2°25' +/-45'

      (2.42° +/-0.75°)
      LH202L-REMDE

      2°25' +/-45'

      (2.42° +/-0.75°)
      LH202L-RDMDE

      2°25' +/-45'

      (2.42° +/-0.75°)
      LH212R-JEMDE

      2°30' +/-45'

      (2.50° +/-0.75°)
      LH212L-JEMDE

      2°30' +/-45'

      (2.50° +/-0.75°)
      LH222R-LEMDE

      2°20' +/-45'

      (2.33° +/-0.75°)
      LH222L-LEMDE

      2°20' +/-45'

      (2.33° +/-0.75°)
      Steering axis inclination
      Except KDH212L-KDPNY

      12°35' +/-45'

      (12.58° +/-0.75°)
      KDH212L-KDPNY

      12°40' +/-45'

      (12.67° +/-0.75°)

    5. Remove the camber-caster-steering axis inclination gauge.

    6. Install the center ornament.

      If the caster and steering axis inclination are not within the specified values after the camber has been correctly adjusted, recheck the suspension parts for damage and/or wear.

  7. ADJUST CAMBER


    1. A01BEII

      Loosen the nut on the front No. 2 suspension camber adjust cam.

    2. Turn the front No. 1 suspension camber adjust cam to adjust the camber.

      Camber inclination

      Except

      TRH213R-KDPNKT

      KDH212L-KDPNY

      -0°20' +/-30'

      (-0.33° +/-0.5°)

      TRH213R-KDPNKT

      KDH212L-KDPNY

      -0°25' +/-30'

      (-0.42° +/-0.5°)

      Note


      • Perform the inspection while the vehicle is empty.

      • The maximum tolerance of right and left difference for the camber and caster is 30' (0.5°) or less.

      • Be sure to inspect toe-in after the camber has been adjusted.

      Tech Tips

      If the camber adjust cam is turned 1 notch to the left when viewing from the front of the vehicle (the bolt moves approximately 1 mm to the outside), the camber will change by approximately -0°13' (-0.22°).

    3. Tighten the camber adjust cam nut.

      Torque:
      170 N*m  { 1730 kgf*cm, 125 ft.*lbf }

  8. ADJUST CASTER


    1. A01BHY9E02

      Loosen the lock nut on the strut bar (rear side).

    2. Turn the adjust nut on the strut bar (front side) to adjust caster.

      Note


      • Perform the inspection while the vehicle is empty.

      • The maximum tolerance of right and left difference for the caster is 30' (0.5°) or less.

      • Be sure to inspect toe-in after the caster has been adjusted.

      Tech Tips

      If the adjust nut of the strut bar (front side) is moved approximately 1 mm (0.04 in.), the caster will change by approximately 0°08' (0.13°).

      Caster inclination
      Australia
      Model Caster
      TRH201R-RBMDKQ

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH201R-RBPDKQ

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH221R-MBMDKQ

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH221R-MBPDKQ

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH223R-LEMDKQ

      2°35' +/-30'

      (2.58° +/-0.50°)
      TRH223R-LEPDKQ

      2°35' +/-30'

      (2.58° +/-0.50°)
      KDH201R-RBMDYQ

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH201R-RBPDYQ

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH221R-MBMDYQ

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH221R-MBPDYQ

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH223R-LEMDYQ

      2°35' +/-30'

      (2.58° +/-0.50°)
      KDH223R-LEPDYQ

      2°35' +/-30'

      (2.58° +/-0.50°)
      South Africa
      Model Caster
      TRH201R-RBMDKN

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH221R-MBMDKN

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH223R-LEMDKN

      2°30' +/-30'

      (2.50° +/-0.50°)
      TRH213R-JDMNKN

      2°35' +/-30'

      (2.58° +/-0.50°)
      TRH223R-LEMNKN

      2°35' +/-30'

      (2.58° +/-0.50°)
      KDH200R-RBMDYN

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH220R-MBMDYN

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH222R-LEMDYN

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH212R-JDMNYN

      2°35' +/-30'

      (2.58° +/-0.50°)
      KDH222R-LEMNYN

      2°35' +/-30'

      (2.58° +/-0.50°)
      New Zealand
      Model Caster
      TRH223R-LEMDKQ

      2°35' +/-30'

      (2.58° +/-0.50°)
      KDH223R-LEMDYQ

      2°35' +/-30'

      (2.58° +/-0.50°)
      TRH223R-LEPDKQ

      2°35' +/-30'

      (2.58° +/-0.50°)
      TRH201R-SRMDK

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH201R-SRPDK

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH201R-SRMDY

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH201R-SRPDY

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH221R-MFMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH221R-MFPDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      Thailand
      Model Caster
      KDH200R-RBMDYT

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH213R-KDPNKT

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH202R-RDMNYT

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH222R-LEMDYT

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH223R-LEMDKT

      2°25' +/-30'

      (2.42° +/-0.50°)
      Singapore
      Model Caster
      KDH221R-MBMDYQ

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH221R-MBPDYQ

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH223R-LEPDYQ

      2°35' +/-30'

      (2.58° +/-0.50°)
      KDH201R-RBPDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH201R-SBMDY

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH203R-REMDY

      2°30' +/-30'

      (2.50° +/-0.50°)
      China
      Model Caster
      TRH213L-JDMNK

      2°35' +/-30'

      (2.58° +/-0.50°)
      TRH223L-LEMNK

      2°30' +/-30'

      (2.50° +/-0.50°)
      TRH223L-LEPNK

      2°30' +/-30'

      (2.50° +/-0.50°)
      The Philippines
      Model Caster
      KDH202L-REMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH212L-JDMNY

      2°35' +/-30'

      (2.58° +/-0.50°)
      KDH212L-KDPNY

      2°25' +/-30'

      (2.42° +/-0.50°)
      G.C.C. Countries (*1)
      Model Caster
      TRH201L-SBMDKV

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH201L-SRMDKV

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH221L-MBMDKV

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH203L-REMDKV

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH213L-JEMDKV

      2°30' +/-30'

      (2.50° +/-0.50°)
      TRH223L-LEMDKV

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH223L-LEMNKV

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH200L-SBMDYV

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH202L-REMDYV

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH212L-JEMDYV

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH222L-LEMDYV

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH222L-LEMNYV

      2°30' +/-30'

      (2.50° +/-0.50°)
      (*1)
      Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar and Kuwait
      Russia
      Model Caster
      TRH223L-LEMNKX

      2°35' +/-30'

      (2.58° +/-0.50°)
      Hong Kong
      Model Caster
      TRH201R-SSMDK

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH201R-SSMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH201R-SSPDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH201R-SSPNY

      2°30' +/-30'

      (2.50° +/-0.50°)
      Mexico
      Model Caster
      TRH201L-SBMDK

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH201L-EFMDK

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH221L-MBMDK

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH221L-LFMDK

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH213L-JDMNK

      2°30' +/-30'

      (2.50° +/-0.50°)
      TRH223L-LEMNK

      2°25' +/-30'

      (2.42° +/-0.50°)
      Central and South America
      Model Caster
      TRH201L-SBMDK

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH221L-MBMDK

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH221L-LFMDK

      2°20' +/-30'

      (2.33° +/-0.50°)
      KDH200L-RBMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH200L-SBMDY

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH201L-SBMDY

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH203L-RDMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      LH200L-RBMDE

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH203L-REMDK

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH203L-RDMDK

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH213L-JEMDK

      2°30' +/-30'

      (2.50° +/-0.50°)
      TRH223L-LEMDK

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH223L-LEMNK

      2°20' +/-30'

      (2.33° +/-0.50°)
      LH202L-REMDE

      2°20' +/-30'

      (2.33° +/-0.50°)
      LH202L-RDMDE

      2°20' +/-30'

      (2.33° +/-0.50°)
      LH212L-JEMDE

      2°30' +/-30'

      (2.50° +/-0.50°)
      LH222L-LEMDE

      2°20' +/-30'

      (2.33° +/-0.50°)
      Malaysia
      Model Caster
      KDH200R-RBMDYE

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH203R-EDMDKE

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH202R-EDMDYE

      2°25' +/-30'

      (2.42° +/-0.50°)
      Algeria
      Model Caster
      KDH222L-LEMNYV

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH200L-RBMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH220L-MBMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH202L-REMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH212L-JEMDY

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH222L-LEMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      Vietnam
      Model Caster
      TRH213L-JEMDKU

      2°30' +/-30'

      (2.50° +/-0.50°)
      TRH213L-JDMNKU

      2°35' +/-30'

      (2.58° +/-0.50°)
      KDH212L-JEMDYU

      2°30' +/-30'

      (2.50° +/-0.50°)
      Others
      Model Caster
      TRH201L-SBMDK

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH221L-MBMDK

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH200R-RBMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH200R-SBMDY

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH200L-RBMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH200L-SBMDY

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH220L-MBMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      LH200R-RBMDE

      2°25' +/-30'

      (2.42° +/-0.50°)
      LH200R-SBMDE

      2°25' +/-30'

      (2.42° +/-0.50°)
      LH200L-RBMDE

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH203R-REMDK

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH203L-REMDK

      2°25' +/-30'

      (2.42° +/-0.50°)
      TRH213R-JEMDK

      2°30' +/-30'

      (2.50° +/-0.50°)
      TRH213L-JEMDK

      2°30' +/-30'

      (2.50° +/-0.50°)
      TRH223R-LEMDK

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH223L-LEMDK

      2°20' +/-30'

      (2.33° +/-0.50°)
      TRH223L-LEMNK

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH202R-REMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH202L-REMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH202L-RDMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH212R-JEMDY

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH212L-JEMDY

      2°30' +/-30'

      (2.50° +/-0.50°)
      KDH222R-LEMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      KDH222L-LEMDY

      2°25' +/-30'

      (2.42° +/-0.50°)
      LH202R-REMDE

      2°25' +/-30'

      (2.42° +/-0.50°)
      LH202L-REMDE

      2°25' +/-30'

      (2.42° +/-0.50°)
      LH202L-RDMDE

      2°25' +/-30'

      (2.42° +/-0.50°)
      LH212R-JEMDE

      2°30' +/-30'

      (2.50° +/-0.50°)
      LH212L-JEMDE

      2°30' +/-30'

      (2.50° +/-0.50°)
      LH222R-LEMDE

      2°20' +/-30'

      (2.33° +/-0.50°)
      LH222L-LEMDE

      2°20' +/-30'

      (2.33° +/-0.50°)

    3. Tighten the lock nut on the strut bar (rear side).

      Torque:
      138 N*m  { 1410 kgf*cm, 102 ft.*lbf }