FRONT SHOCK ABSORBER INSTALLATION


  1. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER


    1. A01BGYX

      Install front shock absorber No.1 cushion retainer, front shock absorber No.2 cushion retainer, and the front shock absorber cushion to the front shock absorber.

      Note

      Install the cushion retainers in the correct direction.

    2. Install the front shock absorber, front shock absorber No.1 cushion retainer , front shock absorber No.2 cushion retainer, and the front shock absorber cushion to the vehicle, and temporarily tighten a new lock nut.

      Note

      Install the cushion retainers in the correct direction.

    3. A01BBI8

      Hold the width across flat of the piston rod and tighten the lock nut with an adjustable wrench until the protrusion length of the thread is the standard length.

      Standard
      3 +- 1 mm (0.12 +- 0.04 in.)
    4. A01BD5CE01

      Install the front shock absorber to the front suspension lower arm. Insert the bolt from the front side of the vehicle and temporarily tighten the bolt.

  2. INSTALL FRONT WHEEL

    Torque:
    100 N*m  { 1020 kgf*cm, 74 ft.*lbf }

  3. STABILIZE SUSPENSION


    1. Bounce the vehicle up and down several times to stabilize suspension.

  4. FULLY TIGHTEN FRONT SHOCK ABSORBER


    1. A01BD5CE01

      Tighten the bolt on the lower side of the front shock absorber.

      Torque:
      105 N*m  { 1,070 kgf*cm, 77 ft.*lbf }