Use the table below to help find the cause of the problem. The causes of the problem are listed in order of probability in the "Suspected area" column. Check each part in order. If necessary, replace these parts.
| Symptom | Suspected area | See page |
|---|---|---|
| Noise in rear differential | Oil level (Low or wrong grade) | |
| Ring gear or drive pinion (Worn or chipped) | ||
| Backlash adjustment (Defective) | ||
| Preload adjustment (Defective) | ||
| Tooth contact between ring gear and drive pinion (Defective) | ||
| Bearing (Worn) | ||
| Oil leak from rear differential | Oil level (Too high or wrong grade) | |
| Carrier oil seal (Worn or damaged) |