SHIFT LEVER SHAFT HOUSING DISASSEMBLY


  1. REMOVE LEVER LOCK PIN NO.2


    1. A01BEXG

      Remove the nut from the lever lock pin No.2.

    2. A01BBSZ

      Using a brass bar and a hammer, remove the shift lever lock pin No.2.

  2. REMOVE SELECT OUTER LEVER


    1. A01BD3T

      Remove the select outer lever and washer from the select lever shaft sub-assembly.

  3. REMOVE SELECT LEVER SHAFT SUB-ASSEMBLY


    1. A01BEBC

      Remove the select lever shaft sub-assembly from the shift lever shaft housing.

  4. REMOVE SHIFT OUTER LEVER LOCK PIN


    1. A01BEBA

      Remove the nut from the shift outer lever lock pin.

    2. A01BCDS

      Using a brass bar and a hammer, remove the shift outer lever lock pin.

  5. REMOVE SHIFT OUTER LEVER NO.1


    1. A01BDWB

      Remove the shift outer lever No.1 from the shift and select lever shaft.

  6. REMOVE SHIFT LEVER BOOT


    1. A01BH8Q

      Remove the shift lever boot from the shift lever shaft housing.

  7. REMOVE SHIFT AND SELECT LEVER SHAFT


    1. A01BF60

      Using a pin punch (5 mm) and a hammer, remove the shift lever shaft set slotted spring pin.

      Note

      Be careful not to damage the shift and select lever shaft.

    2. A01BGUM

      Pull out the shift and select lever shaft and remove the shift and select lever.

  8. REMOVE SELECT SPRING SEAT NO.1


    1. A01BASR

      Remove the select spring seat No.1 and spring from the shift lever shaft housing.

  9. REMOVE REVERSE RESTRICT PIN NO.1


    1. A01BC9V

      Using a hammer, drive a screw extractor into the reverse restrict pin slotted spring pin.

    2. Pull out the reverse restrict pin slotted spring pin from the shift lever shaft housing.

    3. A01BDM4

      Remove the reverse restrict pin No.1 and spring from the shift lever shaft housing.

  10. REMOVE SHIFT LEVER NO.2 SHAFT OIL SEAL


    1. A01BDM8

      Using a screwdriver with its tip taped, remove the shift lever No.2 shaft oil seal from the shift lever shaft housing.

      Note

      Be careful not to damage shift lever shaft housing.

  11. REMOVE SHIFT LEVER SHAFT OIL SEAL


    1. A01BHZG

      Using a screwdriver with its tip taped, remove the shift lever shaft oil seal from the shift lever shaft housing.

      Note

      Be careful not to damage shift lever shaft housing.