SHIFT AND SELECT TRANSMISSION CONTROL CABLE REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A01BG2ME01

      Put matchmarks on the control cable assembly and the outer lever.

    2. Remove the 2 nuts and separate the transmission control cable assembly from the outer lever.

    3. A01BE24

      Using a screwdriver, disengage the claws of the 2 clips.

    4. Remove the 2 clips and separate the transmission control cable assembly from the transmission control cable bracket No.1

    5. A01BECK

      Remove the bolt and control cable support.

    6. A01BAIN

      Remove the bolt and separate the clamp.

    7. A01BC42

      Remove the 2 nuts and control cable bracket No.2.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER


    1. A01BD8D

      Using a clip remover, remove the 2 clips.

    2. Detach the 4 clips and remove the instrument panel finish lower.

    3. Disconnect each connector.

    4. A01BHHW

      Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.

  4. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1


    1. A01BD77

      Using a clip remover, remove the 2 clips

    2. Detach the 3 claws and remove the instrument panel under cover sub-assembly No. 1.

  5. REMOVE PARKING BRAKE HOLE COVER


    1. A01BBGE

      Detach the 6 claws and remove the parking brake hole cover.

    2. Disconnect each connector.

  6. REMOVE SHIFT LEVER KNOB


    1. A01BFW4E01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      Turn the shift lever knob in the direction indicated by the arrow and remove it.

  7. REMOVE SHIFTING HOLE COVER ASSEMBLY


    1. A01BAT5E01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      for Manual Transmission:

      Detach the 6 claws and remove the shifting hole cover assembly.

    2. for Automatic Transmission:

      Detach the 8 claws and remove the shifting hole cover assembly.

  8. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER


    1. A01BGOPE01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      Detach the 8 claws and remove the instrument panel finish panel lower center.

  9. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A01BB4E

      Separate the control cable assembly from the shift lever.

    2. A01BGQ7E01

      Pull out the control cable assembly locks.

    3. Turn the adjust nut clockwise 180°. While holding the adjust nut, separate the control cable assembly.

    4. A01BC69

      Wide body LHD steering position type:


      1. Remove the 2 nuts and clamp.

    5. A01BDF2

      Remove the 2 nuts and front floor footrest.

    6. A01BA7Z

      Remove the 2 bolts and transmission control cable assembly.