REMOVE RECLINING RELEASE HANDLE SUB-ASSEMBLY
Using a piece of cloth, etc., remove the snap ring and reclining release handle sub-assembly.
REMOVE RECLINING ADJUSTER COVER LH
Remove the 2 screws.
Disengage the claw and remove the reclining adjuster cover LH as shown in the illustration.
REMOVE RECLINING ADJUSTER COVER RH
Tech Tips
Use the same procedures for the RH side and LH side.
REMOVE NO. 1 SEAT BACK COVER SUB-ASSEMBLY
Operate the reclining release handle sub-assembly and fold down the seatback onto the seat cushion as shown in the illustration.
Open the fastener of the No.1 seatback cover sub-assembly.
Remove the No.1 seatback cover sub-assembly.
REMOVE NO. 1 SEAT LEG STOPPER HOLDER
REMOVE REAR SEAT LEG STOPPER
REMOVE REAR SEAT INNER BELT ASSEMBLY
Remove the bolt and rear seat belt assembly inner.
REMOVE REAR SEAT OUTER BELT ASSEMBLY
Remove the bolt and rear seat belt assembly outer.
REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE
Remove the 2 screws and 2 No. 1 reclining adjuster release handles.
REMOVE REAR SEAT BACK LOCK COVER
Remove the 4 screws and 2 rear seat back lock covers.
REMOVE REAR SEAT LOCK ROD
Remove the 2 nuts and rear seat lock rod.
REMOVE REAR NO. 1 SEAT LOCK ASSEMBLY
Remove the 2 bolts and 2 rear No. 1 seat lock assemblies.
REMOVE REAR NO. 1 SEAT LEG SUB-ASSEMBLY
Remove the 2 springs.
Remove the 2 E-rings, 2 pins and No. 1 seat leg sub-assembly rear.
REMOVE NO. 1 SEAT CUSHION COVER SUB-ASSEMBLY
Separate the 2 hook and loop fasteners.
Open the fastener and remove the No. 1 seat cushion cover sub-assembly.
REMOVE NO. 1 SEAT CUSHION SPRING ASSEMBLY