REMOVE RECLINING RELEASE HANDLE SUB-ASSEMBLY
Using a piece of cloth, etc., remove the snap ring and reclining handle sub-assembly.
REMOVE RECLINING ADJUSTER COVER LH
Remove the 2 screws.
Disengage the claw and remove the reclining adjuster cover LH as shown in the illustration.
REMOVE RECLINING ADJUSTER COVER RH
Tech Tips
Use the same procedures for the RH side and LH side.
REMOVE NO.1 SEATBACK COVER SUB-ASSEMBLY
Operate the reclining release handle sub-assembly and fold down the seatback onto the seat cushion as shown in the illustration.
Open the fastener of the No.1 seatback cover sub-assembly.
Remove the No.1 seatback cover sub-assembly.
REMOVE NO.1 SEATBACK PAD
REMOVE NO.1 SEAT LEG STOPPER HOLDER
REMOVE REAR SEAT LEG STOPPER
REMOVE REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)
Remove the bolt and rear seat belt assembly inner.
REMOVE REAR SEAT BELT ASSEMBLY OUTER (w/ Seat Belt)
Remove the bolt and rear seat belt assembly outer.
REMOVE REAR SEATBACK LOCK COVER (w/ Seat Belt)
Remove the 4 screws and 2 rear seatback lock covers.
REMOVE REAR SEAT LOCK HANDLE KNOB (w/ Seat Belt)
REMOVE REAR NO.1 SEAT LOCK ASSEMBLY (w/ Seat Belt)
Remove the 2 bolts and 2 rear No.1 seat lock assemblies.
REMOVE NO.1 SEAT LEG SUB-ASSEMBLY REAR
Remove the 2 springs.
Remove the 2 E-rings, 2 pins and No.1 seat leg sub-assembly rear.
REMOVE NO.1 SEAT CUSHION COVER SUB-ASSEMBLY
Separate the 2 magic fasteners.
Open the fastener of the No.1 seat cushion cover sub-assembly and remove the No.1 seat cushion cover sub-assembly.
REMOVE NO.1 SEAT CUSHION PAD
REMOVE NO.1 SEAT CUSHION SPRING ASSEMBLY