CLUTCH PEDAL SWITCH ADJUSTMENT


  1. ADJUST CLUTCH SWITCH ASSEMBLY


    1. Loosen the adjusting nut.

    2. A01BANPE01

      Adjust the switch position so that the clearance labeled A in the illustration, between the clutch switch and cushion, is within the specified range. Then, tighten the adjusting nut.

      Standard Clearance A
      0.6 to 1.0 mm (0.0236 to 0.0393 in.)
      Torque:
      16 N*m  { 160 kgf*cm, 12 ft.*lbf }

      Note

      Before performing the clutch switch assembly adjustment, adjust the pedal free play Click here.