CLUTCH PEDAL SWITCH REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL


    1. A01BD8D

      Using a clip remover, remove the 2 clips.

    2. Detach the 4 clips and remove the instrument panel finish lower.

    3. Disconnect each connector.

    4. A01BHHW

      Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01BD77

      Using a clip remover, remove the 2 clips

    2. Detach the 3 claws and remove the instrument panel under cover sub-assembly No. 1.

  4. REMOVE PARKING BRAKE HOLE COVER


    1. A01BBGE

      Detach the 6 claws and remove the parking brake hole cover.

    2. Disconnect each connector.

  5. REMOVE SHIFT LEVER KNOB


    1. A01BFW4E01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      Turn the shift lever knob in the direction indicated by the arrow and remove it.

  6. REMOVE SHIFTING HOLE COVER ASSEMBLY


    1. A01BAT5E01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      for Manual Transmission:

      Detach the 6 claws and remove the shifting hole cover assembly.

    2. for Automatic Transmission:

      Detach the 8 claws and remove the shifting hole cover assembly.

  7. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. A01BGOPE01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      Detach the 8 claws and remove the instrument panel finish panel lower center.

  8. REMOVE NO. 1 AIR DUCT


    1. A01BDNAE01

      Remove the clip.

    2. Release the 2 claws and remove the air duct No.1.

  9. REMOVE CLUTCH SWITCH ASSEMBLY


    1. Disconnect the clutch switch connector.

    2. A01BBRL

      Remove the clutch switch assembly.