CLUTCH PEDAL REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER


    1. A01BHMVE01

      Using a clip remover, remove the 2 clips (A).

    2. Disengage the 4 clips (B).

    3. Disconnect the connector.

    4. A01BHHW

      Push the positions indicated by the arrows in the illustration to separate the fuel lid lock control cable and bonnet (hood) control cable assembly from the panel.

      Remove the instrument panel finish lower.

  3. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1


    1. A01BE86

      Using a clip remover, remove the 2 clips

    2. Disengage the 3 claws and remove the instrument panel No.1 under cover sub-assembly.

  4. REMOVE PARKING BRAKE HOLE COVER


    1. A01BF1ME01

      Disengage the 6 claws and remove the parking brake hole cover.

  5. REMOVE SHIFT LEVER KNOB


    1. A01BAU7E01

      Turn the shift lever knob in the direction indicated by the arrow and remove it.

  6. REMOVE SHIFTING HOLE COVER ASSEMBLY


    1. A01BF5BE01

      Manual Transmission:

      Disengage the 6 claws and remove the shifting hole cover assembly.

    2. Automatic Transmission:

      Disengage the 8 claws and remove the shifting hole cover assembly.

  7. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER


    1. A01BB5ME01

      Disengage the 8 claws and remove the instrument panel finish panel lower center.

  8. REMOVE WASHER TANK AND PUMP ASSEMBLY (for LHD)

  9. REMOVE AIR DUCT NO.1 (for RHD)


    1. A01BDNAE01

      Remove the clip.

    2. Release the 2 claws and remove the air duct No.1.

  10. SEPARATE CLUTCH MASTER CYLINDER ASSEMBLY


    1. A01BHS1

      Remove the 2 nuts and separate the clutch master cylinder from the clutch pedal support.

  11. REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY


    1. A01BG30

      Push the push rod clevis upward and release it toward the right side of the vehicle.

    2. A01BD7F

      Remove the bolt and clutch pedal support.

  12. REMOVE CLUTCH PEDAL SPRING (2KD-FTV ENGINE TYPE)


    1. A01BHUCE01

      Using a screwdriver, remove the E-ring.

    2. Remove the clutch pedal spring.

  13. REMOVE TURNOVER SPRING SEAT COMPRESSION SPRING


    1. A01BB4M

      Mount the clutch pedal in a soft jaw vise.

    2. While the clutch pedal is fully depressed, remove the compression spring.

  14. REMOVE CLUTCH PEDAL SUB-ASSEMBLY


    1. A01BBP8E01

      Put matchmarks on the clutch pedal support.

    2. Remove the pedal shaft, nut, washer, and clutch pedal from the clutch pedal support.

  15. REMOVE CLUTCH PEDAL SHAFT COLLAR


    1. A01BECGE01

      Remove the 2 pedal bushings and pedal shaft collar from the clutch pedal.

  16. REMOVE CLUTCH PEDAL NO.1 CUSHION


    1. A01BFV4

      Remove the clutch pedal No.1 cushion.

  17. REMOVE CLUTCH PEDAL PAD


    1. Remove the clutch pedal pad from the clutch pedal.

  18. REMOVE CLUTCH PEDAL SPRING HOLDER


    1. A01BAJR

      Remove the clutch pedal spring holder from the clutch pedal support.