SECOND COAST BRAKE REASSEMBLY


  1. INSPECT 2ND COAST BRAKE BAND ASSEMBLY


    1. A01BDJ4E02

      If the lining of the brake band is peeled off or discolored, or even if only a part of the printed numbers are corroded, replace the brake band.

      Tech Tips

      Before assembling the new band, soak it in ATF for at least 15 minutes.

  2. INSTALL 2ND COAST BRAKE PISTON

    A01BD6H

    When the piston rod stroke is outside the standard value even if the brake band works normally, replace the rod with a new one.

    Tech Tips

    There are 2 different lengths for piston rod.

    Piston rod length
    Number of grooves Thickness mm (in.)
    0 78.40 (3.087)
    1 79.90 (3.146)

    1. A01BBUFE02

      Install the washer plate, the compression spring and the piston to the piston rod.

    2. A01BAN4

      Firmly hold down the piston, then compress the compression spring.

    3. Using needle nose pliers, install the E-ring.

  3. INSTALL 2ND COAST BRAKE PISTON OIL SEAL RING


    1. A01BD0Y

      Coat the oil seal ring with ATF.

    2. Install the oil seal ring to the piston groove, then snug it down by squeezing its ends together.

      Note

      Do not over-spread the ring ends.