SUN GEAR AND ONE-WAY CLUTCH DISASSEMBLY


  1. INSPECT ONE WAY CLUTCH ASSEMBLY


    1. A01BHIHE02

      Hold the planetary sun gear, and turn the 1 way clutch assembly Check that the 1 way clutch assembly hub can be freely clockwise and locked counterclockwise.

  2. REMOVE ONE WAY CLUTCH ASSEMBLY


    1. A01BCCE

      Remove the 1 way clutch assembly from the sun gear input drum.

  3. REMOVE ONE WAY CLUTCH THRUST WASHER NO.1


    1. A01BAIO

      Remove the 1 way clutch thrust washer from the sun gear input drum.

  4. REMOVE SUN GEAR SHAFT OIL SEAL RING


    1. A01BHYB

      Remove the 2 oil seal rings from the sun gear input drum.

  5. REMOVE SUN GEAR INPUT DRUM


    1. A01BF37

      Use a wooden block or similar object as a work stand.

    2. A01BEUS

      Using a snap ring expander, remove the snap ring.

    3. Remove the sun gear input drum from the planetary sun gear.

  6. REMOVE SUN GEAR INPUT DRUM SHAFT SNAP RING


    1. A01BGKW

      Using a screwdriver, remove the snap ring from the planetary sun gear.

  7. INSPECT PLANETARY SUN GEAR SUB-ASSEMBLY


    1. A01BHWR

      Using a dial indicator, measure the inside diameter of the planetary sun gear bushings.

      Maximum inside diameter
      27.08 mm (1.0661 in.)

      If the inside diameter is greater than the maximum, replace the planetary sun gear.