EXTENSION HOUSING REAR OIL SEAL REMOVAL


  1. DRAIN AUTOMATIC TRANSMISSION FLUID

  2. REMOVE PROPELLER SHAFT ASSEMBLY


    1. A01BHYPE01

      Put matchmarks on both flanges.

    2. Remove the 4 nuts, bolts and washers.

      Tech Tips

      If the flange connection is hard to separate, temporarily tighten one nut only and evenly tap the flange with a brass bar and hammer to separate the propeller shaft assembly from the differential companion flange.

    3. Remove the propeller shaft assembly.

    4. A01BGHTE01

      Insert SST in the transmission to prevent oil leakage.

      Note

      Do not damage the oil seal.


      1. Use the following SST for the automatic transmission

        SST
        09325-40010

      2. Use the following SST for the manual transmission

        SST
        09325-20010

  3. REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL


    1. A01BA4NE01

      Using SST, pull out the oil seal.

      SST
      09308-00010