PARK / NEUTRAL POSITION SWITCH INSPECTION


  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01BGUNE37
      Text in Illustration
      *a

      Component without harness connected

      (Park/Neutral Position Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      4 (B) - 5 (L) Shift lever in P Below 1 Ω
      2 (RB) - 1 (RL) Shift lever in R Below 1 Ω
      4 (B) - 5 (L) Shift lever in N Below 1 Ω
      2 (RB) - 7 (DL) Shift lever in D or 3 Below 1 Ω
      2 (RB) - 3 (2L) Shift lever in 2 Below 1 Ω
      2 (RB) - 8 (LL) Shift lever in L Below 1 Ω
      4 (B) - 5 (L) Shift lever not in P 10 kΩ or higher
      2 (RB) - 1 (RL) Shift lever not in R 10 kΩ or higher
      4 (B) - 5 (L) Shift lever not in N 10 kΩ or higher
      2 (RB) - 7 (DL) Shift lever not in D or 3 10 kΩ or higher
      2 (RB) - 3 (2L) Shift lever not in 2 10 kΩ or higher
      2 (RB) - 8 (LL) Shift lever not in L 10 kΩ or higher

      If the result is not as specified, replace the park/neutral position switch assembly.