ATF TEMPERATURE SENSOR INSPECTION


  1. INSPECT ATF TEMPERATURE SENSOR


    1. A01BF2HE01
      Text in Illustration
      *a

      Component without harness connected

      (ATF Temperature Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 79 Ω to 156 kΩ
      1 - Body ground Always 10 kΩ or higher
      2 - Body ground Always 10 kΩ or higher

      If the result is not as specified, replace the ATF temperature sensor.

      Tech Tips

      If the resistance is not within the specified range at either of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

      Standard Resistance
      ATF Temperature Specified Condition
      20°C (68°F) 10.3 to 13.9 kΩ
      120°C (248°F) 0.58 to 0.65 kΩ

      If the result is not as specified, replace the ATF temperature sensor.