SHIFT LEVER INSPECTION


  1. INSPECT SHIFT LOCK CONTROL ECU


    1. Disconnect the transmission control switch connector of shift lock control unit assembly.

    2. A01BFATE09
      Text in Illustration
      *a

      Component without harness connected

      (Shift Lock Control ECU)

      Measure the voltage and resistance according to the value(s) in the table below.

      Standard Voltage and Resistance
      Tester Connection Condition Specified Condition
      3 (AT3) - 9 (NSSD) Shift lever in D Below 1 Ω
      3 (AT3) - 9 (NSSD) Shift lever in 3 10 kΩ or higher

      If the result is not as specified, replace the transmission floor shift assembly.