STARTER (for 2.0 kW Type) DISASSEMBLY


  1. REMOVE STARTER YOKE ASSEMBLY


    1. A01BBQOE02

      Remove the nut, and then disconnect the lead wire from terminal C.

    2. Remove the 2 through bolts.

    3. Pull out the starter yoke together with the starter armature.

    4. Remove the O-ring from the starter yoke.

  2. REMOVE MAGNET STARTER SWITCH ASSEMBLY

    A01BBTP

    1. Remove the 2 screws and magnet starter switch.

    2. A01BFZ6E03
      Text in Illustration
      *1 Starter Drive Housing
      *2 Starter Clutch
      *3 Return Spring
      *4 Clutch Roller
      *5 Retainer
      *6 Idle Gear

      Remove the idle gear, retainer, clutch roller, return spring and starter clutch from the starter drive housing.

    3. A01BBLZE03
      Text in Illustration
      *1 Magnet Hand

      Using a magnet hand, remove the steel ball from the clutch.

  3. REMOVE STARTER BRUSH HOLDER ASSEMBLY


    1. A01BHOPE01

      Remove the 2 screws and commutator end frame from the starter yoke.

    2. Remove the O-ring from the starter yoke.

    3. Disconnect the 4 brushes from the starter brush holder.


      1. A01BCH1E01

        Using a screwdriver, hold back the brush spring.

      2. Disconnect the brush from the brush holder.

    4. Remove the brush holder from the starter yoke.

  4. REMOVE STARTER ARMATURE ASSEMBLY


    1. Remove the starter armature from the starter yoke.