STARTER (for 1.7 kW Type) INSTALLATION


  1. INSTALL STARTER ASSEMBLY


    1. Install the starter assembly with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    2. Connect the starter wire and install the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    3. Connect the starter connector.

    4. Close the terminal cap.

    5. Connect the ground cable and wiring harness clamp bracket with the 2 bolts.

      Torque:
      25 N*m  { 251 kgf*cm, 18 ft.*lbf }

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.