STARTER (for 1.6 kW Type) REMOVAL


  1. DISCONNECT NEGATIVE BATTERY CABLE

  2. REMOVE ENGINE UNDER COVER NO.2 (w/ Engine Under Cover No.2)

  3. REMOVE ENGINE SIDE UNDER COVER LH (w/ Engine Side Under Cover LH)

  4. REMOVE ENGINE SIDE UNDER COVER RH (w/ Engine Side Under Cover RH)

  5. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (for Automatic Transmission)


    1. A01BGU8E05

      Remove the nut and disconnect the transmission control cable assembly from the transmission control shaft lever assembly.

    2. Remove the clip and disconnect the transmission control cable assembly from the transmission control cable bracket.

  6. REMOVE TRANSMISSION CONTROL CABLE BRACKET NO.1 (for Automatic Transmission)


    1. A01BBN4E02

      Remove the 2 bolts and transmission control cable bracket to the automatic transmission assembly.

  7. REMOVE STARTER ASSEMBLY


    1. A01BFKRE01

      Remove the 2 bolts, then remove the ground cable and bracket.

    2. A01BEGIE02

      Remove the nut and disconnect the wire harness from terminal 30.

    3. Disconnect the terminal 50 connector from the starter assembly.

    4. Remove the 2 bolts and the starter assembly.