STARTER (for 1.4 kW Type) INSTALLATION


  1. INSTALL STARTER ASSEMBLY


    1. Install the starter with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    2. Connect the starter wire to terminal 30 with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    3. Install the terminal cap.

    4. Connect the starter connector.

    5. Connect the ground wire with the bolt.

      Torque:
      25 N*m  { 250 kgf*cm, 18 ft.*lbf }

    6. Install the wire harness bracket with the bolt.

      Torque:
      25 N*m  { 250 kgf*cm, 18 ft.*lbf }

    7. Attach the wire harness.

  2. INSTALL ENGINE SIDE UNDER COVER RH

    Torque:
    13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  3. INSTALL ENGINE SIDE UNDER COVER LH

    Torque:
    13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  4. INSTALL ENGINE UNDER COVER NO. 2

    Torque:
    13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  5. CONNECT NEGATIVE BATTERY CABLE

  6. PERFORM INITIALIZATION


    1. Some system need initialization when reconnecting the battery cable Click here.