STARTER INSTALLATION


  1. INSTALL STARTER ASSEMBLY


    1. Install the starter assembly with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    2. Connect the wire harness with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    3. Install the terminal cap.

    4. Connect the starter connector.

    5. Connect the wire harness with the bolt.

      Torque:
      25 N*m  { 250 kgf*cm, 18 ft.*lbf }

    6. Install the wire harness bracket with the bolt.

      Torque:
      25 N*m  { 250 kgf*cm, 18 ft.*lbf }

    7. Attach the wire harness clamp to the wire harness bracket.

  2. INSTALL NO. 1 TRANSMISSION CONTROL CABLE BRACKET


    1. Install the transmission control cable bracket with the 2 bolts.

      Torque:
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }

  3. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Connect the transmission control shift cable assembly with a new clip and nut.

      Torque:
      15 N*m  { 148 kgf*cm, 11 ft.*lbf }

  4. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY


    1. Coat a new O-ring with ATF, and install it to the transmission oil filler tube sub-assembly.

    2. Install the transmission oil filler tube sub-assembly with the 2 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

    3. Install the oil level dipstick.

  5. INSTALL TRANSMISSION OIL LEVEL GAUGE SUB-ASSEMBLY

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.