GLOW PLUG (w/ DPF) ON-VEHICLE INSPECTION


  1. INSPECT GLOW PLUG


    1. Remove the No. 1 glow plug connector Click here.

    2. Check the resistance.


      1. A01BBBN

        Using an ohmmeter, measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        Glow plug terminal - Body ground 20°C (68°F) Approximately 1.0 Ω

        Note

        Measure the resistance of the glow plug with it installed to the cylinder head.

        If the result is not as specified, replace the glow plug.

    3. Install the No. 1 glow plug connector Click here.