OIL PRESSURE SWITCHING VALVE INSPECTION


  1. INSPECT OIL PRESSURE SWITCHING VALVE ASSEMBLY


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 13 to 17 Ω

      If the result is not as specified, replace the oil pressure switching valve assembly.

    2. A01BBGUE01

      Connect the positive (+) lead of the battery to terminal 1 and the negative (-) lead to terminal 2 and check that the operating sound of the oil pressure switching valve can be heard.

      Note


      • This test must be performed within 10 seconds to prevent the coil from burning out.

      • Always turn the voltage on and off at the battery, not the oil pressure switching valve.

      If the result is not as specified, replace the oil pressure switching valve assembly.