EXHAUST PIPE (w/ DPF) REMOVAL


  1. REMOVE EXHAUST TAILPIPE ASSEMBLY


    1. A01BAWC

      Remove the 2 bolts.

    2. Disconnect the tailpipe from the center exhaust pipe and remove the gasket.

    3. Remove the tailpipe from the exhaust pipe support.

  2. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. A01BCYM

      Remove the 2 bolts and 2 compression springs.

    2. Disconnect the center exhaust pipe from the 3 exhaust pipe supports.

    3. Remove the gasket.

  3. REMOVE AIR TUBE COVER


    1. A01BI2C

      Remove the 2 bolts.

    2. Detach the 2 clips and clamp, and remove the air tube cover.

  4. REMOVE AIR FUEL RATIO SENSOR

    A01BE28

    1. Disconnect the air fuel ratio sensor connector and detach the clamp.

    2. A01BGMRE01

      Using SST, remove the air fuel ratio sensor from the front exhaust pipe.

      SST
      09224-00010

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. Disconnect the exhaust gas temperature sensor connector and detach the clamp.

    2. Disconnect the No. 2 exhaust gas temperature sensor connector and detach the 2 clamps.

    3. Disconnect the No. 3 exhaust gas temperature sensor connector and detach the 2 clamps.

    4. A01BCWL

      Disconnect the No. 1 exhaust pipe air hose and No. 7 exhaust pipe air hose from the front exhaust pipe.

    5. A01BECT

      Remove the 2 No. 4 exhaust pipe supports.

    6. Remove the 3 nuts and front exhaust pipe.

    7. Remove the gasket.

  6. REMOVE EXHAUST GAS TEMPERATURE SENSOR

    A01BG9U

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.

  7. REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

    A01BG4H

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.

  8. REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR

    A01BDRC

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.

  9. REMOVE NO. 1 EXHAUST PIPE PROTECTOR


    1. A01BG0V

      Remove the 3 bolts and No. 1 exhaust pipe protector.

  10. REMOVE NO. 2 EXHAUST PIPE PROTECTOR


    1. A01BDBR

      Remove the 2 bolts and No. 2 exhaust pipe protector.

  11. REMOVE CATALYTIC CONVERTER BRACKET SUB-ASSEMBLY


    1. A01BHO2

      Remove the bolt and catalytic converter bracket.