CANISTER INSPECTION


  1. INSPECT CHARCOAL CANISTER ASSEMBLY


    1. Check the appearance.


      1. A01BC8E

        Visually check the charcoal canister for cracks or damage.

        If necessary, replace the charcoal canister.

    2. Check the charcoal canister filter.


      1. A01BDMHE01

        Remove the charcoal canister filter.

      2. A01BCU4E01

        Visually check that the charcoal canister filter is not excessively damaged or dirty.

        If necessary, replace the charcoal canister.

    3. Check the ventilation.


      1. A01BBT1E01

        Blow air (4.7 kPa (48 gf/cm2, 0.68 psi)) into port A, then check that the air flows from ports B and C.

        If the ventilation is not as specified, replace the charcoal canister.

    4. Clean the filter in canister.


      1. A01BHTKE01

        Clean the filter by blowing (19.6 kpa (0.2 kgf/cm2, 2.8 psi)) compressed air into port B while holding port A closed.

        Note


        • Do not attempt to wash the canister.

        • No activated carbon should come out.

    5. Install the charcoal canister filter.