AIR SWITCHING VALVE REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE ENGINE UNDER COVER NO.2 (w/ Engine Under Cover No.2)


    1. Remove the engine under cover No.2 together with the engine side under cover LH and engine side under cover RH (for Wide Body).

  3. REMOVE FRONT SEAT ASSEMBLY RH (for Hi-back Seat Type)

    Tech Tips

    Use the same procedures described for the LH side. Click here

  4. REMOVE FRONT SEAT ASSEMBLY RH (for Low-back Seat Type)

    Tech Tips

    Use the same procedures described for the LH side. Click here

  5. REMOVE FRONT DOOR SCUFF PLATE RH

  6. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY


    1. Roll up the carpet, and remove the 5 bolts and engine service hole sub cover.

  7. REMOVE BATTERY SERVICE HOLE COVER


    1. Roll up the carpet.

    2. Remove the battery service hole cover.

  8. DISCONNECT AIR HOSE NO.5


    1. A01BF85E01

      Loosen the clip, and separate air hose No.5.

  9. REMOVE AIR PUMP INLET PIPE


    1. A01BG11E01

      Loosen the clip and disconnect the air hose No.6.

    2. Loosen the clip and disconnect the air hose No.5.

    3. Remove the 2 bolts and the air pump inlet pipe w/ air hose No.6.

  10. REMOVE EXHAUST MANIFOLD HEAT INSULATOR NO.1


    1. A01BGCD

      Remove the 4 bolts and the heat insulator No.1.

  11. REMOVE INTAKE PIPE NO.4


    1. A01BCE9E02

      Remove the 4 nuts and intake pipe No.4.

    2. Remove the 2 gaskets.

  12. REMOVE AIR SWITCHING VALVE ASSEMBLY


    1. A01BCKDE02

      Disconnect the connector.

    2. Remove the 2 nuts and the switching valve.