VACUUM SWITCHING VALVE INSTALLATION


  1. INSTALL VACUUM SWITCHING VALVE ASSEMBLY


    1. Install the vacuum switching valve with the bolt.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    2. Connect the connector and vacuum hose to the vacuum switching valve.

    3. Attach the clamp and wire harness.

    4. Connect the connector to the electric EGR control valve.

  2. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transmission)


    1. A01BBQWE03

      Coat a new O-ring with ATF and install it onto the oil filler tube sub-assembly.

    2. Install the oil filler tube sub-assembly with the 2 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  3. INSTALL NO. 2 ENGINE SERVICE HOLE COVER (for Standard Body)


    1. Install the No. 2 engine service hole cover with the 3 bolts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

    2. Attach the clips and return the carpet to its original position.