FUEL TANK INSTALLATION


  1. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. Install the fuel hose grommet to the fuel tank assembly.

    2. Install a new fuel suction tube set gasket, fuel pump gauge retainer and fuel sender gauge assembly with the 8 bolts.

      Torque:
      4.0 N*m  { 41 kgf*cm, 32 in.*lbf }

    3. Install the fuel tank wire, fuel evaporation No.1 tube sub-assembly, fuel tank main tube sub-assembly and fuel tank return tube sub-assembly to the fuel sender gauge assembly.

  2. INSTALL FUEL TANK ASSEMBLY


    1. A01BAPVE01

      Using the transmission jack, install the 2 fuel tank band sub-assemblies and fuel tank assembly with the 6 bolts.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

    2. Connect the parking brake cable No.3 with the blot.

      Torque:
      15 N*m  { 148 kgf*cm, 11 ft.*lbf }

  3. CONNECT FUEL HOSE NO.3


    1. A01BASME01

      Connect the fuel hose No.3, and tighten the clamp bolt.

  4. CONNECT FUEL TANK BREATHER TUBE


    1. A01BAK9E01

      Connect the fuel tank breather tube and install the clip.

  5. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY


    1. A01BCWZE01

      Connect the fuel tank main tube sub-assembly and install the clip.

  6. CONNECT FUEL TANK RETURN TUBE SUB-ASSEMBLY


    1. Connect the fuel return tube sub-assembly Click here.

  7. CONNECT FUEL TANK WIRE


    1. A01BH6D

      Connect the fuel tank wire.

  8. INSTALL PROPELLER SHAFT ASSEMBLY

    Tech Tips


    • Propeller shaft assembly for Super Long Wheelbase Click here.

    • Propeller shaft assembly for Long Wheelbase Click here.

  9. CHECK FOR FUEL LEAKS


    1. Check that there are no fuel leaks anywhere on the fuel system after doing maintenance.

      Tech Tips

      When checking for fuel leaks, make sure that there is pressure in the fuel line.