FUEL COOLER INSTALLATION


  1. INSTALL FUEL COOLER


    1. A01BHR8E01

      Install the fuel cooler with the 3 bolts.

      Torque:
      18 N*m  { 180 kgf*cm, 13 ft.*lbf }
    2. A01BCLQE01

      Install the 2 fuel hoses to the fuel cooler.

  2. CHECK FOR FUEL LEAKS


    1. PERFORM ACTIVE TEST


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch on.

      3. Turn the intelligent tester on.

      4. Enter the following menus: Powertrain / ECD / Active Test.

      5. Perform the Active Test.

        Intelligent Tester Display Test Details Control Range Diagnostic Notes
        Test the Fuel Leak Pressurizes common rail internal fuel pressure, and checks for fuel leaks Stop/Start

        • Fuel pressure inside common rail pressurized to specified value and engine speed increased to 2,000 rpm when ON is selected

        • Above conditions preserved while test is ON