WINDOW DEFOGGER WIRE REPAIR


  1. INSPECT WINDOW DEFOGGER WIRE

    Note

    When cleaning the glass, wipe it in the direction of the wire with a soft and dry cloth. Take care not to damage the wire. Do not use detergents or glass cleaners with abrasive ingredients. When measuring voltage, wind a piece of tin foil around the tip of the tester probe and press the foil against the wire with your finger, as shown in the illustration.


    1. A01BEJL

      Check the continuity, as the center of each defogger wire, as shown in the illustration.

  2. REPAIR WINDOW DEFOGGER WIRE


    1. A01BF8FE02

      Clean the broken wire tips with a grease, wax and silicone remover.

    2. Place the masking tape along both sides of the wire to be repaired.

    3. Thoroughly mix the repair agent (Dupont paste No.4817).

    4. A01BH81E01

      Using a fine tip brush, apply a small amount of the mixture to the wire.

    5. After a few minutes, remove the masking the tape.

    6. Do not repair the defogger wire for at least 24 hours afterwards.