POWER WINDOW REGULATOR MOTOR INSPECTION


  1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH


    1. A01BG8AE02

      Remove the power window regulator motor.

    2. Apply battery voltage to the motor connector according to the table below.

      Note

      Do not apply battery to any terminals except terminals 1 and 2.

      Standard
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1 (D)

      Battery negative (-) → Terminal 2 (U)

      		 Motor gear rotates clockwise

      Battery positive (+) → Terminal 2 (U)

      Battery negative (-) → Terminal 1 (D)

      		 Motor gear rotates counterclockwise

  2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH


    1. A01BATBE02

      Remove the power window regulator motor.

    2. Apply battery voltage to the motor connector according to the table below.

      Note

      Do not apply battery to any terminals except terminals 1 and 2.

      Standard
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1 (D)

      Battery negative (-) → Terminal 2 (U)

      		 Motor gear rotates counterclockwise

      Battery positive (+) → Terminal 2 (U)

      Battery negative (-) → Terminal 1 (D)

      		 Motor gear rotates clockwise