CLOCK ON-VEHICLE INSPECTION


  1. INSPECT CLOCK


    1. A01BBYRE07

      Disconnect the H20 connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      E1 (H20-7) - Body ground Always Below 1 Ω

    3. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      B (H20-5) - Body ground Always 10 to 14 V
      IG+ (H20-6) - Body ground Ignition switch ON 10 to 14 V

      Tech Tips

      If the value is not as specified, replace the combination meter assembly.