REAR VIEW MONITOR SYSTEM TERMINALS OF ECU


  1. CHECK INNER REAR VIEW MIRROR ASSEMBLY


    1. A01BEXKE02

      Disconnect the u3 inner rear view mirror assembly connector.

    2. Measure the voltage and resistance according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      u3-3 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
      u3-6 (IG) - u3-3 (E) G - W-B Ignition switch signal Ignition switch off Below 1 V
      Ignition switch ON 11 to 14 V
      u3-5 (REV) - Body ground L - Body ground Reverse signal Ignition switch ON, shift lever not in R Below 1 V
      Ignition switch ON, shift lever in R 11 to 14 V

    3. Reconnect the u3 inner rear view mirror assembly connector.

    4. Measure the voltage according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      u3-1 (CV-) - u3-8 (CGND) W - Shielded Television camera ground Always Below 1 V
      u3-2 (CV+) - u3-8 (CGND) R - Shielded Display signal Ignition switch ON, shift lever in R Pulse generation (See waveform)
      u3-7 (CB+) - u3-8 (CGND) B - Shielded Power source Ignition switch ON, shift lever in R 5.5 to 7.05 V
      u3-8 (CGND) - Body ground Shielded - Body ground Shielding Always Below 1 V

    5. Using an oscilloscope, check waveform.

      A01BFSHE01
      Text in Illustration
      *a Waveform A *b Waveform B
      *c Synchronization Signal *d Video Waveform

      Tech Tips

      The video waveform changes according to the image sent by the television camera assembly.

      Waveform
      Item Content
      Terminal No. (Symbol) u3-2 (CV+) - u3-8 (CGND)
      Tool Setting 0.2 V/DIV., 50 μs/DIV.
      Condition

      • Waveform A: Ignition switch ON, shift lever in R (camera lens is not covered, displaying an image).

      • Waveform B: Ignition switch ON, shift lever in R (camera lens is covered, blacking out the screen).

  2. CHECK TELEVISION CAMERA ASSEMBLY


    1. A01BB8EE01

      Disconnect the a5 television camera assembly connector.

    2. Measure the voltage and resistance according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      a5-5 (CGND) - Body ground W-B - Body ground Ground Always Below 1 Ω
      a5-6 (CB+) - Body ground B - Body ground Power source Ignition switch ON, shift lever in R 5.5 to 7.05 V

    3. Reconnect the a5 television camera assembly connector.

    4. Measure the voltage according to the value(s) in the table below.

      Tech Tips

      A waterproof connector is used for the television camera assembly. Therefore, inspect the waveform at the rear view mirror assembly with the connector connected. If the result is not as specified, the television camera assembly may have a malfunction.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      a5-2 (CV-) - a5-5 (CGND) W - Shielded Television camera ground Always Below 1 V
      a5-3 (CV+) - a5-5 (CGND) R - Shielded Display signal Ignition switch ON, shift lever in R Pulse generation (See waveform)

    5. Using an oscilloscope, check waveform.

      A01BFSHE01
      Text in Illustration
      *a Waveform A *b Waveform B
      *c Synchronization Signal *d Video Waveform

      Tech Tips


      • A waterproof connector is used for the television camera assembly. Therefore, inspect the waveform at the inner rear view mirror assembly with the connector connected. If the result is not as specified, the television camera assembly may have a malfunction.

      • The video waveform changes according to the image sent by the television camera assembly.

      Waveform
      Item Content
      Terminal No. (Symbol) a5-3 (CV+) - a5-5 (CGND)
      Tool Setting 0.2 V/DIV., 50 μs/DIV.
      Condition

      • Waveform A: Ignition switch ON, shift lever in R (camera lens is not covered, displaying an image).

      • Waveform B: Ignition switch ON, shift lever in R (camera lens is covered, blacking out the screen).