FRONT NO. 1 SPEAKER INSTALLATION


  1. INSTALL FRONT NO.1 SPEAKER ASSEMBLY


    1. A01BFTBE01

      Using an air riveter or hand riveter, install 3 new strike rivets on the front No.1 speaker assembly on the front door panel.

      Tech Tips

      Install the new strike rivets in order as shown in the illustration.

      Note


      • A01BHQY

        Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

      • A01BFWN

        Confirm that the rivets are seated properly against the speaker.

      • Do not tilt the riveter when installing the rivet to the speaker.

      • Do not leave any space between the rivet head and speaker.

      • A01BFQV

        Do not leave any space between the speaker and door. Firmly hold together the 2 items while installing the rivet.

    2. Connect the connector.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A01BGT1E01

      Engage the 12 clips and install the front door trim board sub-assembly with the screw.

  3. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (Without Power Window)


    1. Temporarily install the front door window regulator handle assembly, and completely close the front door glass.

    2. A01BDB2E01

      Install the front door window regulator handle as shown in the illustration.