RADIO ANTENNA POLE REMOVAL


  1. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER


    1. A01BD8D

      Using a clip remover, remove the 2 clips.

    2. Detach the 4 clips and remove the instrument panel finish lower.

    3. Disconnect each connector.

    4. A01BHHW

      Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.

  2. REMOVE RADIO ANTENNA POLE


    1. A01BH46E01

      Disconnect the connector and 2 clamps.

    2. Tie a string to the radio antenna pole.

      Tech Tips

      Leave the string in the vehicle. It will be used when installing the pole.

    3. A01BFBD

      Using a T20 "TORX" socket wrench, remove the 2 screws and radio antenna pole.

      Note

      Removal and installation can be performed up to 3 times.

    4. Untie the string from the radio antenna pole.