RADIO ANTENNA CORD (for Instrument Panel Side) INSTALLATION


  1. INSTALL ANTENNA CORD SUB-ASSEMBLY


    1. for LHD:


      1. for Glass Antenna Type:

        Attach the 3 clamps to install the antenna cord sub-assembly.

      2. for Pole Antenna Type:

        Attach the 4 clamps to install the antenna cord sub-assembly.

    2. for RHD:


      1. Attach the 4 clamps to install the antenna cord sub-assembly.

  2. INSTALL INSTRUMENT PANEL ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Airbag System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  4. CHECK SRS WARNING LIGHT (w/ Airbag System)

    Click here