RADIO RECEIVER REMOVAL


  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO.1


    1. A01BE1S

      Using a moulding remover, disengage the 3 claws and remove the instrument cluster finish panel No.1 garnish.

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER


    1. Using a roof moulding remover, disengage the claws in the order shown in the illustration.

      A01BB7FE01
    2. A01BHFSE01

      Attach tape to the positions shown in the illustration in order to prevent the instrument cluster finish panel sub-assembly center from being damaged.

    3. Using a moulding remover, disengage the claw.

    4. A01BH2Y

      Hold the panel as shown in the illustration and pull it toward the rear of the vehicle to disengage the claws.

    5. A01BEFS

      While supporting the panel with your right hand, pull it toward the rear of the vehicle to disengage the claws.

    6. A01BEKP

      Hold the panel as shown in the illustration and disengage the claws.

    7. A01BBA7

      Hold the panel as shown in the illustration and pull it toward the rear of the vehicle to disengage the claws. Remove the instrument cluster finish panel sub-assembly center.

  3. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. A01BDOX

      Remove the 4 screws.

    2. Disconnect the connectors and the radio receiver assembly with bracket.

  4. REMOVE RADIO RECEIVER PANEL (1DIN TYPE)


    1. A01BDA3

      Remove the 2 screws and the radio receiver panel.

  5. REMOVE RADIO RECEIVER PANEL (1DIN TYPE)


    1. A01BGDH

      Remove the 2 screws and the radio receiver panel.

  6. REMOVE RADIO BRACKET NO.1


    1. 1DIN TYPE:


      1. Remove the 4 screws and the radio bracket No.1.

    2. 1.4DIN TYPE:


      1. Remove the 3 screws and the radio bracket No.1.

    3. 2DIN TYPE:


      1. Remove the 4 screws and the radio bracket No.1.

        A01BHFLE01

  7. REMOVE RADIO BRACKET NO.2


    1. 1DIN TYPE:


      1. Remove the 4 screws and the radio bracket No.2.

    2. 1.4DIN TYPE:


      1. Remove the 3 screws and the radio bracket No.2.

    3. 2DIN TYPE:


      1. Remove the 4 screws and the radio bracket No.2.

        A01BHIXE01