COMBINATION METER REMOVAL


  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.2 GARNISH


    1. A01BHUS

      Using a moulding remover, disengage the 3 claws and remove the instrument cluster finish panel No.2 garnish.

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER


    1. Using a roof moulding remover, disengage the claws in the order shown in the illustration.

      A01BB7FE01
    2. A01BHFSE01

      Attach tape to the positions shown in the illustration in order to prevent the instrument cluster finish panel sub-assembly center from being damaged.

    3. Using a moulding remover, disengage the claw.

    4. A01BH2Y

      Hold the panel as shown in the illustration and pull it toward the rear of the vehicle to disengage the claws.

    5. A01BEFS

      While supporting the panel with your right hand, pull it toward the rear of the vehicle to disengage the claws.

    6. A01BEKP

      Hold the panel as shown in the illustration and disengage the claws.

    7. A01BBA7

      Hold the panel as shown in the illustration and pull it toward the rear of the vehicle to disengage the claws. Remove the instrument cluster finish panel sub-assembly center.

  3. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1 GARNISH


    1. A01BE1S

      Using a moulding remover, disengage the 3 claws and remove the instrument cluster finish panel No.1 garnish.

  4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. A01BGLR

      Using a moulding remover, disengage the 4 claws and remove the instrument cluster finish panel assembly.

  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01BI23

      Disengage the 6 claws and remove the instrument cluster finish panel sub-assembly.

  6. REMOVE COMBINATION METER ASSEMBLY


    1. A01BAQR

      Remove the 2 screws.

    2. A01BHR3E01

      Disengage the 2 claws.

    3. Disconnect the connector and remove the combination meter assembly.