METER / GAUGE SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    According to the DATA LIST displayed by the intelligent tester, you can read the values of the switches, sensors, actuators and so on without parts removal. Reading the DATA LIST as the first step of troubleshooting is one method to shorten work time.


    1. Warm up the engine.

    2. Turn the ignition switch off.

    3. Connect the intelligent tester to the DLC3.

    4. Turn the ignition switch ON.

    5. Operate the intelligent tester according to the steps on the display and select the "DATA LIST".

    ENGINE
    Item Measurement Item/ Range (Display) Normal Condition Diagnostic Note
    Vehicle Speed Vehicle speed / Min.: -256 km/h (-159 mph), Max.: 254 km/h (158 mph) Almost same as actual vehicle speed (When driving) -
    Coolant Temp Coolant temperature / Min.: -40°C (-40°F), Max.: 140°C (284°F) After warming up: 80 to 95°C (176 to 203°F) If the value is -40°C (-40°F) or 140°C (284°F), sensor circuit is open or shorted.