BACK DOOR LOCK REASSEMBLY


  1. INSTALL DOOR CONTROL MOTOR


    1. Apply MP grease to the sliding parts of the door control motor.

    2. A01BBXY

      Using a T25 "TORX" socket wrench, install the door control motor with the 3 "TORX" screws.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Tech Tips

      A new door control motor uses self-tapping screws to thread new installation holes when the self-tapping screws are inserted.

  2. INSTALL BACK DOOR CLOSER MOTOR ASSEMBLY


    1. A01BEBI

      Install the back door control motor assembly with the 3 bolts.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }

    2. Connect the connectors and attach the clamp.

  3. INSTALL BACK DOOR LOCK ASSEMBLY


    1. Apply MP grease to the sliding parts of the back door lock assembly.

    2. A01BB49

      Install the back door lock assembly with the 4 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  4. INSTALL PIN HOLD CLIP


    1. A01BERU

      Install the pin hold clip.

  5. INSTALL BACK DOOR CLOSER COVER


    1. A01BGYO

      Attach the 3 claws and 3 clips to install the back door closer cover.

  6. INSTALL BACK DOOR REMOTE CONTROL ASSEMBLY


    1. Install the back door remote control assembly with the 3 screws.

    2. Connect the wire and link.

    3. Attach the 2 clamps.

      A01BADM

  7. INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY


    1. Install the back door inside handle assembly with the 3 screws.

    2. Connect the link.

      A01BB30E02
      Text in Illustration
      *A w/o Power Door Lock *B w/ Power Door Lock

  8. INSTALL BACK DOOR TRIM BOARD


    1. A01BA72

      Install the back door trim board with the 16 clips.

  9. INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY


    1. A01BDEV

      Install the back door inside handle assembly with the screw.