TRANSMITTER BATTERY (w/ Smart Entry and Start System) REPLACEMENT


  1. REPLACE TRANSMITTER BATTERY

    Note

    Take extra care when handling these precision electronic components.


    1. A01BBULE01

      Slide the release hook knob and pull the emergency key in the order indicated in the illustration.

    2. A01BBEKE01

      Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

      Note

      Do not use excessive force when prying apart the transmitter housing cover.

      Tech Tips

      Tape the screwdriver tip before use.

      Text in Illustration
      *1 Protective Tape
    3. A01BDUM

      Remove the transmitter battery housing cover.

    4. A01BHJ7E01
      Text in Illustration
      *1 Protective Tape

      Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. Doing so may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      Tech Tips

      Tape the screwdriver tip before use.

    5. A01BDDB

      Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

      Note


      • Do not bend the transmitter battery electrode during insertion.

      • Keep the transmitter housing case interior free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.

    6. A01BCKH

      Install the transmitter battery housing cover.

      Tech Tips

      Press down on the entire circumference of the transmitter battery housing cover.

    7. A01BD1I

      Install the transmitter housing cover.

    8. A01BH7A

      Insert the emergency key into the electrical key transmitter sub-assembly.

    9. Press one of the transmitter switches and check that the LED illuminates.