POWER DOOR LOCK CONTROL SYSTEM TERMINALS OF ECU


  1. INSTRUMENT PANEL J/B

    A01BGUIE01

    1. Disconnect the 5A, 5B, 5E, 5H and H7 connectors.

    2. Measure the resistance according to the value(s) in the table below.

      *1: w/ Power window (RHD models), *2: w/ Power window (LHD models), *3: w/o Power window

      If the result is not as specified, there may be a malfunction on the wire harness side.

    3. Reconnect the 5A, 5B, 5E, 5H and H7 connectors.

    4. Measure the voltage according to the value(s) in the table below.

      5. If the result is not as specified, the instrument panel J/B (body ECU) may have a malfunction.