REAR WIPER MOTOR REMOVAL


  1. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    1. A01BGS2E01

      Disengage the 3 claws and separate the head cap as shown in the illustration.

    2. Remove the rear wiper arm nut and rear wiper arm and blade assembly.

  2. REMOVE REAR WIPER SHAFT COVER


    1. A01BAL3

      Remove the rear wiper shaft cover.

  3. REMOVE REAR NO.1 WIPER LINK PIVOT WASHER


    1. A01BCFP

      Using the socket wrench (27 mm), remove the lock nut and rear No.1 wiper link pivot washer.

      Note

      Do not damage the glass.

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER


    1. A01BC10E01

      Disengage the 6 clips and remove the back door trim board assembly upper.

    2. Remove the remaining clips on the body, and reinstall them to the back door trim board assembly upper.

  5. REMOVE REAR WIPER MOTOR


    1. A01BBR7E01

      Disconnect the connector and remove the clamp.

    2. Remove the 3 bolts and rear wiper motor and grommet as a unit.

    3. A01BGZ1E01

      Remove the grommet from the rear wiper motor.