WIPER AND WASHER SYSTEM PROBLEM SYMPTOMS TABLE

Use the table below to help find the cause of the problem. The numbers indicate the priority of the likely cause of the problem. Check each part in order. If necessary, replace these parts.

1. FRONT WIPER AND WASHER SYSTEM
Symptom	Suspected area	See page
Both front wipers and washer systems do not operate.	1. IG1 Relay	-
	2. Wiper switch	Click here
	3. Wire harness or connector	-
Front wipers do not operate when the windshield washer is normal.	1. WIP Fuse	-
	2. Wiper switch	Click here
	3. Front wiper motor	Click here
	4. Wire harness or connector	-
Front wipers do not operate in LO or HI.	1. WIP Fuse	-
	2. Wiper switch	Click here
	3. Front wiper motor	Click here
	4. Wire harness or connector	-
Front wipers do not operate in INT.	1. Wiper switch	Click here
	2. Front wiper motor	Click here
	3. Wire harness or connector	-
Windshield washer motor does not operate.	1. WSH Fuse	-
	2. Wiper switch	Click here
	3. Front washer motor	Click here
	4. Wire harness or connector	-
Front wipers do not operate when a jet washer fluid is emitted with the washer switch on.	1. Wiper switch	Click here
	2. Front wiper motor	Click here
	3. Wire harness or connector	-
A jet of washer fluid is not emitted when windshield washer motor is normal.	1. Washer hose and nozzle	-
Wiper blade does not return or the return position is wrong when the windshield wiper switch is off.	1. Front wiper motor	Click here
	2. Wire harness or connector	-

2. REAR WIPER AND WASHER SYSTEM
Symptom	Suspected area	See page
Both rear wiper and washer systems do not operate.	1. IG1 Relay	-
	2. RR WIP-WSH Fuse	-
	3. Wiper switch	Click here
	4. Wire harness or connector	-
Rear wiper does not operate in INT or ON.	1. Wiper switch	Click here
	2. Rear wiper motor	Click here
	3. Wire harness or connector	-
Rear washer motor does not operate.	1. Wiper switch	Click here
	2. Rear washer motor	Click here
	3. Wire harness or connector	-
A jet of washer fluid is not emitted when rear washer motor is normal.	1. Washer hose and nozzle	-
Wiper blade does not return or the return position is wrong when the rear wiper switch is off.	1. Rear wiper motor	Click here
	2. Wire harness or connector	-