WIPER AND WASHER SYSTEM PRECAUTION


  1. PRECAUTION FOR WASHER NOZZLE (4WAY TYPE) HANDLING


    1. Do not adjust the washer nozzle with a safety pin, etc. as the washer nozzle tip is made of resin and could be damaged. Be sure to use SST for adjustment.

      SST
      95060-10010

    2. When the washer nozzle is clogged with wax, etc., do not use metal objects such as a safety pin to clean the washer nozzle hole. Be sure to use a soft resin brush, etc.

    3. While using the battery during inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.

  2. IGNITION SWITCH EXPRESSIONS


    1. The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

      Expression Ignition Switch (Position) Engine Switch (Condition)
      Ignition Switch off LOCK Off (Lock)
      Ignition Switch ACC ACC On (ACC)
      Ignition Switch ON ON On (IG)
      Engine Start Start On (Start)