FRONT ROOM LIGHT ASSEMBLY INSPECTION


  1. INSPECT FRONT ROOM LIGHT ASSEMBLY


    1. A01BCUH

      Remove the front room light assembly.

    2. Apply battery voltage to the front room light assembly connector.

    3. Check that the front room light comes on.

      OK
      Measurement condition Switch condition Specified condition

      Battery positive (+) → Terminal 2

      Battery negative (-) → Body ground

      		 ON Front room light comes on

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 1

      		 DOOR Front room light comes on

      If the result is not as specified, replace the front room light assembly.

      Tech Tips

      Check that the ground wire of the front room light assembly is connected to body ground.