VENTURI REMOVAL


  1. SEPARATE CABLE FROM NEGATIVE BATTERY TERMINAL

  2. SEPARATE AIR CLEANER HOSE NO.2


    1. Loosen the bolt, and disconnect the air cleaner hose No.2.

  3. REMOVE INTAKE AIR CONNECTOR SUB-ASSEMBLY


    1. Disconnect the ventilation hose.

    2. Disconnect the turbo pressure sensor connector.

    3. A01BCJN

      Remove the bolt, 3 nuts, intake air connector and gasket.

  4. REMOVE VENTURI ASSEMBLY


    1. A01BAY2E01

      Disconnect the throttle open switch connector.

    2. A01BFXZE01

      Disconnect the throttle control motor connector.

    3. Remove the venturi and gasket.